One problem in need of special attention is not on the wall to install the security risks in addition to the possible danger may contact tip, there is a greater risk is likely to cause the bedside table tilting. Li Youzhong told reporters that the bedside cabinet volume is relatively small, if not to the bedside cabinet to the wall, when the drawer fully open very easily lead to tipping. The solution now has two: one is made of two drawers is only half open, but consumers will feel very easy thing to take place. There is a way back on the nightstand plus a steel plate toplastic spa hot tub gazebo waterproof deckingincrease the weight, but this does not seem attractive. "As the children's furniture business must be the top priority product safety, consumers do not want the bedside table fixed to the wall are also very understanding, we also try to live safe times to ensure product quality will be the basis of the original nightstands After the corner arc process also. "more like once a chicken quality manager, he told reporters.
Edge "mellow" There is not In addition to cutting-edge, the sharpness of the edge may easily harm a threat to children. "Even touch, can feel several degrees down Bedside sample counter edge circle is different." Participate in the third-party testing organization engineer he told reporters. In the national standard GB28007-2011, the pair of contacts outside corners and the tip has been particularly rounding radius requirements, exterior decks and front door setsbut not to deal with the sharp edges of the product to make specific numerical requirements. Instrument but according to GB6675 "national toy safety technical specifications", the use of a test strip with self-adhesive at the edge of the slide can be touched to see self-adhesive tape to determine whether the risk of breakage enough.
"This is to simulate the process of the reach of children and sharp edges are cut risks exist." Children's furniture GB second drafters, Shenzhen Institute of Metrology, Quality building materials at home senior engineer Wu Haitao told the correspondents. As for why children's furniture sharp edges are not as sophisticated as the direct provision of specific rounding radius or arc, Wu Haitao finally told reporters: "In fact, we in the process of developing the national standard, has mentioned the radius of rounded edges also make specific The value specified, but in the end considering the build a cheap floorwhole industry, especially sheet metal furniture rounded difficult process, there is no specific provision made. " "Although the national standard is not to be rounded edge radius requirements, but this does not affect the more popular products in the design and production process of the product safety of the control, we will be set according to different curvature of each product style, and according to the product Test security architecture, "Ouyang Dongping finally told reporters.